To play iPod/USB memory device tracks via voice operation (vehicles with Bluetooth® 2.0 interface)
7-40 Comfort controls
2. After the voice guide says “Would you
like to play by Artist, Album, Playlist or
Genre?,” say “Playlist”.
3. After the voice guide says “What Playlist
would you like to play?,” say the playlist
name.
4. If there is only one match, the system pro-
ceeds to step 6.
5. If there are two or more matches, the
voice guide will say “More than one
match was found, would you like to play
<playlist>?” If you say “Yes,” the system
proceeds to step 6.
If you say “No,” the next matching playl-
ist name is uttered by the system.
6. After the voice guide says “Playing
<playlist>,” the system creates an index
for the playlist.
7. The system exits the voice recognition
mode and starts playback.
N00772500010
1. Say “Play” on the main menu.
2. After the voice guide says “Would you
like to play by Artist, Album, Playlist or
Genre?,” say “Genre”.
3. After the voice guide says “What Genre
would you like to play?,” say the music
type.
4. If there is only one match, the system pro-
ceeds to step 6.
5. If there are two or more matches, the
voice guide will say “More than one
match was found, would you like to play
<genre>?” If you say “Yes,” the system
proceeds to step 6.
If you say “No,” the next matching genre
is uttered by the system.
The Bluetooth
®
2.0 interface starts recogniz-
ing the connected device.
If the connected device cannot be recognized
or a connection error occurs, the Bluetooth
®
2.0 interface starts an appropriate voice
guide. Follow the voice guide.
If you say “Playlist <playlist>,” you can skip
step 3.
If the device has no playlist, the voice guide
will say “There are no playlists stored on
device” and the system returns to step 2.
If you say “No” to three or all playlist names
uttered by the system, the voice guide will
say “Playlist not found, please try again” and
the system returns to step 2.
If the confirmation function is active, the
voice guide confirms if the playlist name is
correct. If the playlist name is correct, say
“Yes”. If not, say “No”. After the voice guide
says “Playlist not found, please try again,”
the system returns to step 2. Refer to “Con-
firmation function setting” on page 5-196.
To search by genre
The Bluetooth
®
2.0 interface starts recogniz-
ing the connected device.
If the connected device cannot be recognized
or a connection error occurs, the Bluetooth
®
2.0 interface starts an appropriate voice
guide. Follow the voice guide.
If you say “Genre <type>,” you can skip step
3.
BK0223400US.book 40 ページ 2015年2月13日 金曜日 午後12時15分