Mitsubishi 2016 OUTLANDER User Manual

Child restraint systems
Seat and restraint systems 4-29
4
N00418801167
The outboard seating positions in the second
row seat of your vehicle are equipped with
lower anchors for attaching child restraint
systems compatible with the LATCH system.
N00418901201
Your vehicle has 3 attachment points on the
backside of the second row seats. These are
for securing a child restraint system tether
strap to each of the 3 rear seating positions in
your vehicle.
N00419000198
N00419101271
1. In order to securely fasten the tether strap,
remove the head restraint from the loca-
tion where you wish to install the child
restraint system.
2. Open the gap a little between the seat
cushion (A) and the seatback (B) with
your hand to locate the lower anchors (C).
Installing a child restraint sys-
tem using the LATCH (Lower
Anchors and Tethers for chil-
dren) system
Lower anchor locations
NOTE
 The symbols on the seatback show the loca-
tion of the lower anchor points.
Tether anchor locations Examples of child restraint sys-
tems compatible with the LATCH
system
A- Rear-facing child restraint system
B- Front-facing child restraint system
C- Child restraint system lower anchor
connectors
D- Tether strap
(These are only examples.)
Using the LATCH system
BK0223400US.book 29 ページ ２０１５年２月１３日 金曜日 午後１２時１５分
Information Provided by:

Mitsubishi 2016 OUTLANDER Specifications

General

Brand	Mitsubishi
Model	2016 OUTLANDER
Category	Automobile
Language	English