Mitsubishi 4G6 - Crankshaft Oil Seal

ENGINE <4G6> -
Crankshaft Oil Seal
11A-20
CRANKSHAFT OIL SEAL
11200310135
REMOVAL AND INSTALLATION
(Engine oil:
bolt wash-
er surface)
127-137 Nm
10
5
4
3
2
1
<M/T>
<A/T>
7
9
12
8
11
<M/T>
<A/T>
Crankshaft
(Engine oil:
bolt washer
surface)
Crankshaft
9
10
12
5
Sealant: 3M Stud locking 4170 or equivalent
Lip section
Lip section
Engine oil
127-137 Nm
6
8
Crankshaft front oil seal removal
steps
D
Timing belt (Refer to P.11A-26.)
D
Crank angle sensor
(Refer to GROUP 16.)
1. Crankshaft sprocket
2. Flange
3. Crankshaft sprocket B
4. Key
"CA
5. Crankshaft front oil seal
Crankshaft rear oil seal removal
steps
D
Oil pan (Refer to P.11A-19.)
AA"D
Transmission assembly
D
Clutch cover and disc <M/T>
6. Crankshaft bushing
AB""BA
7. Plate <M/T>
AB""BA
8. Adapter plate
AB""BA
9. Flywheel <M/T>
AB""BA
10. Drive plate <A/T>
AB""BA
11. Adapter plate <M/T>
"AA
12. Crankshaft rear oil seal