Mitsubishi 4G6 - Cylinder Head Gasket

ENGINE <6A1> -
Cylinder Head Gasket
11B-24
CYLINDER HEAD GASKET
11200400559
REMOVAL AND INSTALLATION
Pre-removal and Post-installation Operation
D Engine Coolant Draining and Refilling (Refer to
GROUP 14 - On-vehicle Service.)
D Air Intake Hose Assembly Removal and Installation
D Radiator Assembly Removal and Installation (Refer
to GROUP 14 - Radiator.)
D Air Intake Plenum and Intake Manifold Removal and
Installation (Refer to GROUP 15 - Air Intake Plenum.)
D Engine Cover Removal and Installation
D Drive Belt Tension Adjustment (Refer to P.11B-5.)
D Timing Belt Removal and Installation (Refer to
P.11B-26.)
D Fuel Discharge Prevention (Refer to GROUP 13A
- On-vehicle Service.)
D Front Exhaust Pipe Removal and Installation (Refer
to GROUP 15.)
D Thermostat Case Assembly Removal and Installation
(Refer to GROUP 14 - Water Hoses and Pipes.)
D Water Inlet Pipe Removal and Installation (Refer to
GROUP 14 - Water Hoses and Pipes.)
1
2
3
4
5
6
7
8
9
10
11
3.4 Nm
3.4 Nm
(Engine oil)
35 Nm
10 - 12 Nm
11
4
2
5
9
(Engine oil)
20 Nm
®
+ 120
_ ®
+ 120
_
20 Nm
®
+ 120
_ ®
+ 120
_
Removal steps
1. PCV hose connection
2. Blow-by hose connection
3. Breather hose connection
4. Vacuum hose connection
5. Spark plug cable
6. Rocker cover
7. Idler pulley
8. Timing belt rear centre cover
A
A
""
B
A
9. Cylinder head bolt
10. Cylinder head assembly
"
A
A
11. Cylinder head gasket