ENGINE <4G6> -
Service Specifications/Sealants/Special Tools
11A-4
Items LimitStandard value
Idle speed r/min 750 ± 100 -
CO contents % 0.5 or less -
HC contents ppm 100 or less -
Compression pressure (250- 400 r/min) kPa 1,400 Min. 1,060
Compression pressure difference of all cylinder kPa - Max. 100
Intake manifold vacuum kPa - Min. 69
Cylinder head bolt shank length mm - 99.4
Auto-tensioner push rod movement mm Within 1 -
Timing belt tension torque Nm (Reference value) 3.5 -
Auto-tensioner rod protrusion amount mm 3.8 - 4.5 -
Timing belt B tension mm 5-7 -
SEALANTS
11100050201
Items Specified sealants Remarks
Rocker cover and cylinder head
Semi-circular packing
3M ATD Part No.8660 or equivalent -
Oil pan
Thermostat case
MITSUBISHI GENUINE PART
MD970389 or equivalent
Semi-drying sealant
Flywheel bolt 3M Stud Locking 4170 or equivalent -
SPECIAL TOOLS
11100060457
Tool Number Name Use
MB991502 MUT-II sub assem-
bly
D Checking the idle speed
D Erasing diagnosis code
MB990767 End yoke holder D Holding the camshaft sprocket
D Holding the crankshaft sprocket
MD998719 or
MD998754
Crankshaft pulley
holder pin
D Holding the camshaft sprocket
D Holding the crankshaft sprocket
To Next Page
Loading...
