MITSUBISHI
ELECTRIC
7011A SERIES UPS
OWNERS / TECHNICAL MANUAL
Page Number:
3-1
MITSUBISHI ELECTRIC 7011A SERIES UPS
3.0 INSTALLATION AND OPERATION
3.1 TRANSPORTATION AND INSTALLATION
TABLE 3.1 How to transport and install the system
Transportation Installation
Transport unit with forklift. Pull out the UPS cabinet as shown in Figure 3.1
Fix the UPS unit in place using the four (4) leveling
NOTE: Do not transport in a horizontal position. Cabinets should be
maintained upright within +/- 15° of the vertical during handling.
3.2 HANDLING
The UPS is shipped in export packaging. Remove the UPS from the package only when it is
ready for installation. Refer to Figure 3.1 for handling.
FIGURE 3.1 Handling
RAMP
Roof of the package
during shipping
5
1
2
3
4
Leveling
feet
To Next Page
Loading...
Need help?
General
