Mitsubishi FREQROL-SFJ - Data Rewrite

I
Data rewrite
~~ I
To rewrite previously set
data, press SET switch.
0
When the switch is pressed,
LEDs ADD flickers indicat-
ing that data can be rewrit-
ten.
Set desired data by pressing
0
UP
and/or oawt switches.
Cl
Value can
e incremented by
pressing
0
UP switch, and de-
cremented
switch.
y pressing @j
Value changes continuously
while switch is held down.
When SEf switch i's pressed
0
again,
newly set data is
stored.
After the switch is pressed,
LEDs ADD light continuously.
1 Data set.completed 1
o Press ~ESU switch and reset the FR-SFJ(or turn off and
0
then on the power).
Now data setting has been completed.
f-
- 25'-