Mitsubishi FX2N series User Manual

FX2N Series Programmable Controllers Standards
xii
Models : MELSEC FX series manufactured
from
January 1st, 1996 FX-EPROM-8, FX-EEPROM-8, FX-EEPROM-4,
from
July 1st, 1997 FX-EEPROM-16
to March 31st,2002
(compliance with IEC1010-1)
from April 1st 2002:Above mentioned products
(compliance with EN61131-2)
Standard Remark
IEC1010-1:1990 Safety requirements for electrical
/A1:1992 equipment for measurement, control,
and laboratory use
The equipment has been assessed as a component for
fitting in a suitable enclosure which meets the
requirements of IEC 1010-1:1990 and A1:1992)
EN61131-2:1994 Programmable controllers
/A11:1996 - Equipment requirements and tests
/A12:2000
The equipment has been assessed as a component for
fitting in a suitable enclosure which meets the
requirements of
EN61131-2:1994+A11:1996+A12:2000

Mitsubishi FX2N series Specifications

General

Type	Programmable Logic Controller (PLC)
Manufacturer	Mitsubishi Electric
Series	FX2N
Power Supply	100-240VAC or 24VDC
Program Capacity	8, 000 steps
Expansion	Yes, via expansion modules
Operating Temperature	0 to 55°C
I/O Points	16 to 256 points
Communication	RS-422, RS-485
Programming Language	Ladder Logic
Instruction Execution Speed	0.08 µs/basic instruction
Mounting	DIN rail
Data Memory	8, 000 words
Expansion Modules	Analog, digital, communication
Humidity	5 to 95% RH (non-condensing)