Features and controls
3-171
3
System check screen
When the ignition switch is turned to the “ON” position, the
system check screen is displayed for about 4 seconds. If there
is no fault, information screen (when the ignition switch is
“ON”) is displayed.
If there is a fault, the screen changes to warning display. Refer
to “Warning display list (when the ignition switch is “ON”)” on
page 3-203.
OTE
● The system check screen display varies depending on
your equipment.
Service reminder
When the time for periodic inspection arrives, the warning dis-
play is displayed for a few seconds after the screen that is ini-
tially displayed when the ignition switch is turned “ON”. Refer
to “Service reminder” on page 3-181.
Type 1
Type 2
Type 1 Type 2
BK0102103US.book 171 ページ 2009年10月26日 月曜日 午後1時38分