Mitsubishi LANCER User Manual

6-20
For emergencies
6
Wheel covers (if so equipped)
N00849400166
To remove
Wrap the tip of the bar with a cloth, insert it deeply into the
notch provided in the wheel cover, and pry the cover away
from the wheel.
Using the same procedure at the other wheel cover notches,
work the wheel cover away from the wheel to remove it com-
pletely.
N
OTE
● The wheel cover is made of plastic. Be careful when pry-
ing it off.
To install
CAUTION
!
● Trying to remove the wheel cover with only your
bare hands can seriously injure your fingers.
CAUTION
!
● Before installing the wheel cover to the wheel, make
sure that the tabs (A) on the back of the wheel cover
correctly engage the ring (B) to prevent the wheel
cover from coming off. Do not install a wheel cover
that has broken tabs.
Type 1
Type 2
BK0102103US.book 20 ページ ２００９年１０月２６日 月曜日 午後１時３８分

Mitsubishi LANCER Specifications

General

Brand	Mitsubishi
Model	LANCER
Category	Automobile
Language	English