Mitsubishi LANCER

Features and controls
3-179
3
Outside temperature display screen
N00556500049
Shows the temperature outside the vehicle.
N
OTE
● The display setting can be changed to the preferred units
(°F or °C).
Refer to “Changing the function settings (With ignition
switch in the “ON” position)” on page 3-184.
● The outside temperature can be displayed from about
-22°F to 122°F (-30°C to 50°C).
● Depending on factors such as the driving conditions, the
displayed temperature may vary from the actual outside
temperature.
Twin Clutch SST control mode display screen
(Twin Clutch SST)
N00545100029
The operation status of the Twin Clutch SST control mode is
displayed. Refer to “Twin Clutch SST control mode” on page
3-113.
ACD control mode display screen (if so equipped)
N00545900030
The operation status of the ACD control mode is displayed.
Refer to “ACD control mode” on page 3-128.
Fuel remaining display screen
N00556600079
Shows the amount of fuel remaining.
N
OTE
● It may take several seconds to stabilize the display after
refilling the tank.
● If fuel is added with the ignition switch in the “ON” posi-
tion, the remaining fuel display may indicate an incorrect
fuel level.
CAUTION
!
● Running out of gas could damage the catalytic con-
verter. If the warning display appears, refuel as soon
as possible.
Type 1 Type 2
BK0102103US.book 179 ページ ２００９年１０月２６日 月曜日 午後１時３８分