EasyManuals Logo

Mitsubishi LANCER User Manual

Mitsubishi LANCER
670 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #408 background imageLoading...
Page #408 background image
Comfort controls
5-19
5
N
OTE
When the temperature control dial is set to the “MAX
A/C” position, the air conditioning compressor will run
automatically and the light will come on. The recircula-
tion position will be selected automatically. In this case,
you cannot turn the air conditioning off or select the out-
side air position.
When the temperature control dial is set to a position other
than “MAX A/C”, the air selection will automatically
change to outside air. The air conditioning will revert to
the previous condition in which the “MAX A/C” position
was not selected.
Combination of unheated air and heated air
N00731300211
Set the mode selection dial to one of the positions shown in the
illustration and set the air selection switch (A) to the outside air
position.
Warm air flows to the leg area and unheated or slightly warm
air (depending upon the position of the temperature control
dial) flows to the upper part of the passenger compartment.
BK0102103US.book 19 ページ 2009年10月26日 月曜日 午後1時38分

Table of Contents

Other manuals for Mitsubishi LANCER

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitsubishi LANCER and is the answer not in the manual?

Mitsubishi LANCER Specifications

General IconGeneral
BrandMitsubishi
ModelLANCER
CategoryAutomobile
LanguageEnglish

Related product manuals