Vehicle care and maintenance
7-87
7
3. To install the bulb, perform the removal steps in reverse.
OTE
● Before replacing the bulb, put the dome light (front)/read-
ing lights switch into the “OFF” position.
● When mounting the lens, align the tab (B) with the hole
on the vehicle body.
Dome light (rear) (if so equipped)
N00944100260
1. Insert a screwdriver into the notch of the light assembly
and pry gently to remove the lens.
OTE
● Wrap a cloth around the tip of the screwdriver to keep
from scratching the lens.
BK0102103US.book 87 ページ ２００９年１０月２６日 月曜日 午後１時３８分
To Next Page
Loading...
