Mitsubishi MELSEC-A series - Page 114

6. HOW TO USE EACH FUNCTION
_. MELSEC-A
6.7.1 Settlng/resetting X, Y, M, L, B, and F by list monitoring (SeVreset of a bit device)
This operation setdresets (turns ON/OFF) a bit device forcibly by designating
a device and
a device number.
[Basic operation]
GO
c
] set
] Reset
d"'[ested.
)
he device at the
cursor position is
-I GO t+ Set -
-1 GO t+ Reset
GO .I
1 i
[Sample operation]
Device
"X002" at the cursor position is set and designated device "M 100" is
reset
SET I
T 19 K10
31 MI OX003
Select the TEST mode, and read the
step number which device is to be
tested.
Set the bit device at the cursor posi-
tion.
PT- Set (Turn ON) 'X002"
T 29 K20
31 MI
OX003
32 OUT
1MlOl
T 29 K10
30)LD 1x002
~
I
31 AMI 0x003
SHIFT RST 1
11100 RET 4 Reset designated device 'M100".
Reset (Turn OFF) "M100'
31 WI OX003
6-47