Mitsubishi MELSEC-A series - APPENDIX 2 AD71 Processing Times

.-
6. HOW TO USE EACH FUNCTION
__1 MELSEC-A
6.9.16 Setting the buzzer ON/OFF when a key is pressed (Buzzer setting)
This operation turns the buzzer ON or OFF when an A8PUE key is pressed.
(Default is buzzer ON.)
[Basic operation]
-
SHIFT GO
[Sample operation]
When the buzzer is OFF when an A8PUE key is pressed
Select the OTHERS mode.
2 PLC CHECK
3 PLC SYSTBY
Select "4:PU SETTING'.
2 STATUS DISPLAY
3 BEEP SBTTINO
BEEP SETTINO
Select '3:BEEP SETTING'
BBEP SETTING Select "OFF'.
...
[Explanation]
-.
Pressing the [END] or [CLEAR] keys returns to the "4:PU SETTING" menu.
6-95