6 - 102 6 - 102
MELSEC-Q/QnA
6 BASIC INSTRUCTIONS
[Operation Errors]
(1) There are no operation errors associated with the DI and EI instructions.
(2) There are no operation errors associated with the IMASK instruction.
[Program Example]
(1) The following program is designed to enable the execution of only the interrupt programs
having the interrupt pointer numbers I1 and I3 while X0 is ON.
[Ladder Mode] [List Mode]
P10
7
Steps
Instruction
Device
7
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
