WIPER AND WASHER SYSTEM
- Windshield Wipers
8-171
WINDSHIELD WIPE
REMOVAL AND INSTALLATION
NOBKJAD
16W961
Removal steps
1. Wiper blades
l
+ 2. Wiper arms
3. Wiper pivot shield caps
4. Wiber pivot collars
NOTE
4*
5. Wiper motor
(1) Reverse the removal procedures to reinstall.
6. Wiper link
(2) 4* : Refer to “Service Points of Removal”.
(3) I)* : Refer to “Service Points of Installation”
SERVICE POINTS OF REMOVAL
5. WIPER MOTOR
Uncouple the linkage and motor (with the wiper motor
pulled slightly outward).
Caution
Because the installation position of the crank arm and the
motor determine the wiper auto stop angle, do not disas-
semble them unless it is necessary to do so. If the crank arm
must be removed from the motor, remove it only after
marking their mounting positions.
svision
I
To Next Page
Loading...
