8476
WIPER AND WASHER SYSTEM
- Rear Wiper
16W1541
Battery
2.3
t
Battery
-
To wiper
motor bracket
+
10w1543
OPERATION CHECK
Connect battery (+ :I to terminal 1 and battery ( -) to terminal 3
to ch’eck that the motor runs.
AUTOMATIC OPERATION CHECK
(1) Connect battery (+) to terminal 1 and. battery ( - ) to
terminal 3 to run the motor.
(2) While the motor is running, disconnect terminal 1 to stop
the motor.
(3) Connect terminal 2 to terminal 3 and connect battery (+)
to terminal 1 and battery (-) to wiper motor bracket to
check that the motor starts to run again and then stops.
1 STB Revision
-7