3. DISPLAY AND OPERATION SECTIONS
3 - 4
Regenerative load ratio
Cumulative feedback pulses
Effective load ratio
Peak load ratio
Instantaneous torque
Within one-revolution
position (1 pulse unit)
Servo motor speed
Within one-revolution
position (1000 pulses unit)
Droop pulses
ABS counter
Cumulative command
pulses
Load to motor inertia ratio
Command pulse frequency
Bus voltage
Number of tough drive operations
Unit power consumption 1
(1 W unit)
Unit total power consumption 1
(1 Wh unit)
Unit power consumption 2
(1 kW unit)
Unit total power consumption 2
(100 kWh unit)
Current position
Command position
Command remaining distance
Point table/Program No.
Step No.
Analog override voltage
Override level
Cam axis one
cycle current
value
Cam standard
position
Cam axis feed
current value
Cam No. in
execution
Cam stroke
amount in
execution
(Note)
Main axis
current value
Cumulative feedback pulses
Main axis one
cycle current
value
Main axis one cycle current position
Analog speed limit voltage
Analog speed command
voltage
Analog torque command
voltage
Analog torque limit voltage
DOWN
UP
Settling time
Oscillation detection
frequency
Internal temperature of
encoder
To Next Page
Loading...
