3. DISPLAY AND OPERATION SECTIONS
3 - 18
(b) Parameters of 6 or more digits
The following example gives the operation procedure to change the electronic gear numerator to
"123456" with [Pr. PA06 Electronic gear numerator].
The display blinks.
Press "MODE" to switch to the basic parameter screen.
Press "UP" or "DOWN" to select [Pr. PA06].
Press "SET" once.
Press "SET" once.
Setting of upper 1 digit
Change the setting with
"UP" or "DOWN".
Press "SET" once.
Enter the setting.
Press "MODE" once.
Press "MODE" once.
Setting of
lower 4 digits
…… ……
……… ……
To Next Page
Loading...
