Mitsubishi Q12PRHCPU - Page 396

App - 35
Appendix 6 Precautions for Using Serial Communication Module
Appendix 6.1 CSET Instruction
APPENDICES
The program example of specifying the send area head address and the send
area size is shown in Diagram App.24.
(For the I/O signal is X/Y80 to X/Y9F)
The program example of specifying the receive area head address and the
receive area size is shown in Diagram App.25.
(For the I/O signal is X/Y80 to X/Y9F)
Diagram App.24 Program Example
Diagram App.25 Program Example
Sets D0 to head address C00
H
.
Sets D1 to buffer memory length 100
H
.
Writes send area setting value.
0
X9E X9F
MOVP H0C00 D0
MOVP H100 D1
TOP H8 H0A2 D0 K2
Sets D0 to head address D00
H
.
Sets D1 to buffer memory length 300
H
.
Writes receive area setting value.
0
X9E X9F
MOVP H0D00 D0
MOVP H300 D1
TOP H8 H0A6 D0 K2