Mitsubishi S4L2 User Manual

103 / 195
Service Manual Mitsubishi SL-Series diesel engines
Version 08/2004
Air Inlet System and Exhaust System
ENGLISH
ASSEMBLY
ASSEMBLY
23 Air Inlet System and
Exhaust System
23.1 Air inlet cover installation
Tighten the bolts that hold the air inlet cover to the
specified torque.
23.2 Exhaust manifold installation
Tighten the bolts that hold the exhaust manifold to the
specified torque.
Use a new
gasket
Tightening torque:
1.85 ± 0.35 kgf m
(13.4 ± 2.5 lbf ft’
¨18 ± 3.4 N m*
Tightening torque:
1.85 ± 0.35 kgf m
(13.4 ± 2.5 lbf ft’
¨18 ± 3.4 N m*
Use a new
gasket
Tightening torque
1.85 ± 0.35 kgf·m
(13.4 ± 2.5 lbf·ft)
[18 ± 3.4 N·m]
Tightening torque
1.85 ± 0.35 kgf·m
(13.4 ± 2.5 lbf·ft)
[18 ± 3.4 N·m]

Mitsubishi S4L2 Specifications

General

Compression Ratio	22:1
Aspiration	Naturally Aspirated
Fuel System	Direct injection
Engine Model	S4L2
Starting System	Electric Starter
Cooling System	Water-cooled
Engine Type	4-stroke, water-cooled, diesel engine
Lubrication System	Forced lubrication