Mitsubishi S6R Series User Manual

6-15
Chapter 6 INSPECTION AND REPAIR OF BASIC ENGINE
2.7.2 Camshaft Bushing - Install
(1) Insert the camshaft bushing installer into camshaft
bushing and install the cam bushing sleeve.
(2) Face the cut of the camshaft bushing upward and set the
camshaft bushing in camshaft fitting bore of crankcase
while aligning the oil hole in camshaft bushing with oil
hole in crankcase.
Orient the notch of camshaft bushing of No. 1 journal
to No 2 cylinder.
Place the locating bolt hole of camshaft bushing of No.
7 journal to No 6 cylinder side.
(3) Set the cam bushing plate and cam bushing bolt.
(4) Apply molybdenum-disulfide base anti-seizure lubri-
cant (ThreeBond 1910 or equivalent) to the tip of cam
bushing bolt (the position that will touch cam bushing
installer).
(5) Screw in the cam bushing bolt and push the cam bush-
ing installer to press-fit the camshaft bushing.
Note: Press-fit the camshaft bushing while aligning the oil
hole in crankcase and oil hole in camshaft bushing.
(6) Install the sealing washer and set bolt to fix the cam-
shaft bushing.
Camshaft Bushing (Beginning of Pressing) - Press-Fit
Camshaft Bushing (Set) - Press-Fit
Camshaft Bushing Types on Jounals
Cam bushing plate
Cam bushing
installer
Cam bushing
sleeve
No. 1 journal
camshaft bushing
Apply molybdenum-disulfide base anti-seizure
lubricant (ThreeBond 1910 or equivalent).
Cam bushing bolt
Notch
Cam bushing plate
Cam bushing
installer
Cam bushing
sleeve
Camshaft bushing
Apply molybdenum-disulfide base anti-seizure
lubricant (ThreeBond 1910 or equivalent).
Cam bushing bolt
Notch faces
upward
Front
Rear
No. 1 journal
No. 2 thru No. 6 journal
No. 7 journal
Camshaft bushing
Sealing washer
Set bolt
Notch
faces
upward

Mitsubishi S6R Series Specifications

General

Brand	Mitsubishi
Model	S6R Series
Category	Engine
Language	English