Mitsubishi TU100SAE - Setting the Defrost Interval Timer

- 31 -
4 Initial setting
1
5
2
6
3
7
9
4
8
10
Setting the defrost interval timer
１
２・４
３・５
1

Press the [MODE] switch.
⇒
The display changes to the "Clock/calendar display mode".
2

Press the [UP] or [DOWN] switch until
the display changes to the "Defrost
interval timer setting mode". (Right
figure)
3

Press the [SET] switch.
⇒
Time starts to blink on the lower
digital display.
Icons
and starts to blink.
4

Press the [UP] or [Down] switch to
select the setting time.
NOTE
●
The defrost interval time can be selected
from 12 steps ranging from 1H (1 hour)
at the minimum to 12H (12 hours) at the
maximum.
5

Press the [SET] switch.
⇒
Setting is completed, and the display returns to the "Defrost interval
timer setting mode".