- 60 -
7 Inspection
1
5
2
6
3
7
9
4
8
10
Daily inspection
Inspection of cooling water quantity
-MAX-
-MIN-
MIN
MAX
Reservoir tank
Do not perform inspection of the cooling water or refill
it immediately after the engine stopped.
• High temperature steam may blow out and it may cause heat
injury.
Use the designated antifreeze coolant.
• Otherwise, it may cause troubles.
1
Check that the fluid level is between "MAX" and "MIN" in the reservoir
tank.
2
When the fluid level is lower than "MIN", refill the designated antifreeze
coolant to the level of "MAX".
( Refer to page 68 for the designated antifreeze coolant.)
To Next Page
Loading...
