Mitsubishi TU100SAE - Details of Applicable Oils and Cooling Water

- 68 -
7 Inspection
1
5
2
6
3
7
9
4
8
10
Details of applicable oils and cooling water
Type / Name Capacity
Engine fuel
Diesel fuel
(Intense cold season: cold
weather diesel fuel)
-
Engine oil
Type API Class CE or higher
10W-30
9.5L
Compressor oil Diamond Freeze MA32R
1.25L
[Single Specification (TU100SAE)]
1.35L
[Multiple Specification (TU100SAEM)]
Cooling
water
Antifreeze
coolant *
Fuso Diesel Long Life Coolant
4.6L
(including reservoir)
Water Soft water with fewer impurities
*Use the antifreeze coolant with the following concentrations according to the
lowest ambient temperature of the region.
Antifreeze coolant
concentration (%wt)
30 35 40 45 50 55 60
Antifreeze coolant
quantity (L)
1.4 1.6 1.8 2.1 2.3 2.5 2.8
Lowerst ambient
temperature (°C)
-10 -15 -20 -25 -30 -35 -40
*Initial setting: Antifreeze coolant concentration: 50%wt
NOTE
●
Adjust antifreeze coolant concentration according to the expected lowest
ambient temperature.
If it is not appropriate, the cooling water may be frozen and cause the
damage of the radiator or engine.
●
As the cooling water is an industrial waste, observe the applicable laws and
regulations in your country to dispose it.
Power supply system

Specification of power supply (for Motor drive)
Capacity of
power supply
(kVA)
Switch
Voltage
fluctuation
Voltage drop
at start-up
Interphase
imbalance
Molded-case circuit breaker
Capacity of
switch (A)
Rated capacity
of over-current
breaker (A)
20 50 50
Within 10% of
rated voltage
Within 15% of
rated voltage
Within 3%
(50Hz)