- 63 -
7 Inspection
1
5
2
6
3
7
9
4
8
10
Inspection of engine fuel quantity
Use the designated engine fuel.
• Otherwise, it may cause damage of the engine.
1
Always check the fuel quantity with the
fuel level gauge to avoid running short
of fuel during transportation.
2
If there is not enough fuel left in the
tank, refuel it.
[ Refer to page 68 for designated
fuel.]
NOTE
●
Stop the operation with the "Operation switch" when refueling.
●
When fuel has run out, select the fuel circulation mode (
Refer to 37 page)
to supply fuel to the engine and also to purge air from the fuel system before
starting operation.
Inspection of leakage and wiring condition
1
Check if there is no leakage of cooling water, engine oil or engine fuel
from the tanks, pipes or connecting parts.
2
Check if there is no damage on the wire connected to the battery.
3
If any abnormal conditions are detected, contact your nearest dealer.
Fuel gauge
To Next Page
Loading...
