Mitsubishi TU100SAE - Selecting the Operation Pattern

- 39 -
5 Operation
1
5
2
6
3
7
9
4
8
10
Selecting the operation pattern
１
２・４
３・５
1

Press the [MODE] switch.
⇒
The display changes to the "Clock/calendar display mode".
2

Press the [UP] or [DOWN] switch until
the display changes to the "Operation
pattern selection mode". (Right figure)
3

Press the [SET] switch.
⇒
It is changed to the operation pattern
selection setting mode on the LCD
display.
4

Press the [UP] or [DOWN] switch
to select the automatic start/stop
operation or the continuous operation.
⇒
: Automatic start/stop
operation (At the shipment)

: Continuous operation
5

Press the [SET] switch.
⇒
Selection is completed, and the display returns to the "Operation pattern
selection mode".