Mitsubishi TU100SAE - Page 54

- 49 -
5 Operation
1
5
2
6
3
7
9
4
8
10
5

Press the [SET] switch.
⇒
The setting time (hour) starts to blink.
6

Press the [UP] or [DOWN] switch to
adjust the time to the ON timer setting
time (hour).
NOTE
●
The clock shows the time up to 24
hours.
Set "19:00" if it is 7 o'clock PM.
7

Press the [SET] switch.
⇒
The setting time (minute) starts to
blink.
8

Press the [UP] or [DOWN] switch to
adjust to the ON timer setting time
(minute).
9

Press the [SET] switch.
⇒
The setting is completed and the display returns to the "Setting the ON
timer".
NOTE
●
When performing the timer operation with the motor drive, confirm that the
commercial power supply is connected to the refrigeration unit.
●
When the ON timer operation is selected, take note that the refrigeration unit
starts the operation automatically at the setting time.
●
Set beforehand the operation pattern to be turned on at the timer startup.