- 70 -
9 For emergency
1
5
2
6
3
7
9
4
8
10
Alarm display
When any trouble occurs, the warning icon
lights (backlight blinks) or blinks.
●
Check the alarm code displayed in the
digital display area.
When no alarm codes are displayed in the
digital display area, switch the screen to
the "Current alarm display" manually in
the following procedure, and check the
contents.
Switching "Normal display" and "Current alarm display"
Switching from "Normal display screen" to "Current alarm display mode"
Press once each on the [MODE] switch and [UP] switch. (The display returns
to the "Normal display screen" 10 seconds later.)
Extending "Current alarm display mode"
Press the [SET] switch on the "Current alarm display mode" screen.
Switching from "Current alarm display mode" to "Normal display screen"
Press the [MODE] switch 2 times on the extended display of "Current alarm
display mode".
(The screen changes to "Normal display screen" in 10 seconds in case of 1
press.)
To Next Page
Loading...
