Mitsubishi UD8350 User Manual

EN-17
• Whentheverticalarcadjustmentispositive(+)(or
the ARC is adjusted in the  direction)
Press the

button.
Press the

button.
Press the

button.
Press the

button.
When you press the  or  button in the RESET
mode, the distortion correction is reset.
Important:
• WhentheCURVED-modeadjustmenttakeseffect,
the resolution decreases. In addition, stripes may
appear or straight lines may bend in images with
complicated patterns. They are not due to product
malfunctions.
• WhentheCURVED-modeadjustmentisperformed,
the displayed image may be distorted.
• Dependingontheinstallationconditionsofthe
projector and the screen or the correction amount
of the CURVED-mode adjustment, you may not
obtain a complete rectangular screen or the correct
aspect ratio. Slight distortion can be corrected by
the CORNERSTONE-mode adjustment.
• Noisemayappearonthescreenduringthe
CURVED-mode adjustment because of the type
of the video signal being projected and the setting
values of the CURVED-mode adjustment. In such
cases, set the CURVED-mode adjustment values
in the range where the image is displayed without
noise.
• WhenyoucarryouttheKEYSTONE-mode
adjustment and the CURVED-mode adjustment
in combination, the adjustment range becomes
narrower than that in the case where you carry out
these adjustments individually. When setting the
arc setting value of the CURVED-mode adjustment
to 31 or larger, you cannot use the KEYSTONE-
mode adjustment.
• WhencarryingouttheCURVED-modeadjustment
while the option lens is in use, you may not be
able to obtain a perfectly rectangular image or
the correct aspect ratio. Slight distortion can
be corrected by the CORNERSTONE-mode
adjustment.
Setting up your projector (continued)

Mitsubishi UD8350 Specifications

General

Brand	Mitsubishi
Model	UD8350
Category	Projector
Language	English