29
No. 99MAH056A
4 Measurement Method
(Short press) / (Long press)
4.4
Tolerance Judgment
The upper/lower limit allowable values can be set to provide a GO/NG judgment
for the measured value (pass/fail judgment).
Allowable values can be set independently for absolute measurement (ABS)/
incremental measurement (INC).
For information on setting, refer to
"5.6 Selecting the Tolerance Judgment
Result Display Method and Setting Allowable Values" on page 46.
●
Displaying tolerance judgment results
Normal display
(measured value
and judgment result)
Enlarged display
(judgment result
only)
–NG OK +NG
–NG OK +NG
To Next Page
Loading...
