Mitutoyo ID-C0512ENXB - Selecting the Tolerance Judgment Result Display Method and Setting Allowable Values

45
No. 99MAH056A
5 Setting Parameters
(Short press) / (Long press)
1 Press the [F2] key.
» Resolution can be set.
2 Press the [F1] key or [F3] key to set the resolution.
» Each time the key is pressed, it will switch the resolution.
3 Press the [F2] key.
» Settingsareconrmed;shiftstothenextparameteritem.
(Go to "5.6 Selecting the Tolerance Judgment Result Display Method
and Setting Allowable Values" on page 46.)