7 - 5
No. 99MBC032A
7. INSPECTION AND MAINTENANCE
7.5 Fuse replacement
• Before replacing a fuse, turn the power switch to OFF and unplug the power cord from the
inlet for safety.
• Always use fuses that have the specified rating.
• Refer to the following diagram for the replacement procedure.
To replace a fuse, insert a
screwdriver blade into the
groove on the head of the fuse
holder, turn the screwdriver
counterclockwise as shown
by the arrow, then remove the
fuse holder cover.
The groove on the head
of the fuse holder
Screwdriver
To Next Page
Loading...
