Mitutoyo LSM-9506 - Confirming the Function Setup Contents

4 - 38 No. 99MBC032A
4.5.3.10 Confirming the function setup contents
Every setting that has been made in the function setup mode can be confirmed using the
ENT
key without affecting the existing setup data.
PROG
Step 1: In the ready state press the
SET
and
ENT
keys
to enter the segment setup mode.
Step 2: Each time the
ENT
key is pressed, each piece of setup data for segments through
group judgment will be displayed sequentially. Record these data in the List of
Function Setups, at the end of this user's manual.
Step 3: Press the
SET
key twice to return to the ready state.