Mitutoyo LSM-9506 - 4. Setting Up the Measuring Conditions; 4.1 Basic Setup

4
4- 1
No. 99MBC032A
Set up the various functions as required to customize the system for the
utmost measurement accuracy.
SETTING UP THE
MEASURING CONDITIONS
4.1 Basic Setup
• In the basic setup mode select and modify the appropriate functions to meet your measur-
ing purpose. It is not necessary to set up functions which will not be used.
• The basic setup should be performed at the beginning of operation.
Modification of the basic setup after calibration or function setup has been made may
result in the cancellation of the calibration or function setup values.
• Commands via the RS-232C interface can not be accepted in the basic setup mode.