23
2 Basic Measuring Methods
No. 99MAF600B
3
Turn the probe unit up/down wheel, and slowly bring the stylus into contact with surface s2
until there is a "beep" sound (keep the stylus in contact with the surface).
y For step measurements
s1 (0 mm)
s2
» When the measurement is complete,
[H] and the measurement value are
displayed on the LCD.
It will be automatically output at the
same time to the connected external
device.
y For groove width measurements
s1 (0 mm)
s2
» When the measurement is complete,
[H] and the measurement value are
displayed on the LCD.
It will be automatically output at the
same time to the connected external
device.
4
Press [HOLD DATA].
» The displayed measurement value is
held. (Press [HOLD DATA] again to
release the hold.)
To Next Page
Loading...
