Mitutoyo QM-Height QMH-350AX - Page 61

47
3SpecicUsageApplications
No. 99MAF600B
2
Press [ZERO/ABS] to select [ASSIST] (assist function).
M1 M2
3
Press [←] or [→] to select [RUN].
Examples of registra-
tions
1st: Top surface
measurement
2nd: Top surface
measurement
3rd: Inside diameter
measurement
4
Press [ENTER].
» Therstregisteredmeasurementitemwillthenbe
called.
5
Performmeasurementsusingtherstregisteredmeasurementitem.
For details about making measurements, see
"2 Basic Measuring Methods" on page 11.
For inside diameter measurements, outside
diameter measurements, and plane scanning
measurements, press [ENTER] after the
measurements are completed.
» After the measurement is completed, the second regis-
tered measurement item will be called.
6
To continue measuring press [ENTER];tonishmeasuringpress[CANCEL].