MLis MLB-G3002 - SMS Explanation

MLB-G3002 Terminal User Guide 22 Rev 1.1
5.1.1 SMS Explanation
AT+CNMI New short Message Indication
AT+CNMI=1,1
AT+CMGF Select SMS message format
AT+CMGF=1
Text mode=1; PDU mode=0
AT+CPMS Preferred SMS message storage
AT+CPMS=<mem1>[, <mem2>[, <mem3>]]
+CPMS: <used1>, <total1>, <used2>, <total2>, <used3>, <total3>
  
󰇛󰇜
Memory to be used when listing, reading and deleting messages:
"BM" Broadcast message storage
"ME" Mobile Equipment message storage
"SM" (P) USIM message storage
"SR" Status report message storage
  
󰇛󰇜
Memory to be used when writing and sending messages:
"ME" Mobile Equipment message storage
"SM" (P) USIM message storage
  
󰇛󰇜
Received messages will be placed in this memory storage if routing to TE is not set. See command AT+CNMI
with parameter <mt>=2. received CBMs are always stored in "BM" unless directly forwarded to TE. Received
status reports are always stored in "SR" unless directly forwarded to TE.
"BM" Broadcast message storage
"ME" Mobile Equipment message storage