MLis MLB-G3002 - Command Operation for SMTP Mode

MLB-G3002 Terminal User Guide 35 Rev 1.1
5.5 Command Operation for SMTP mode
AT^SICS=0,conType,GPRS0
OK
AT^SICS=0,apn,"internet"
OK
AT^SISS=9,srvType,"Smtp"
OK
AT^SISS=9,conId,"1"
OK
AT^SISS=9,address,"smtps://Username\00gmail.com:***
*****\00smtp.gmail.com"
OK
AT^SISS=9,smSubj,"My Test Mail"
OK
AT^SISS=9,smFrom,"subscriber1\00gemalto.com"
OK
AT^SISS=9,smRcpt,"subscriber2\00gmail.com,subscribe
r3\00gemalto.com"
OK
AT^SISS=9,smAuth,"login"
OK
AT^SISS=9,smMsg,"This is the message for mail
testing."
OK
AT^SISS=9,path,file:///a:/data/
OK
AT^SISS=9,cmd,"files"
Select connection type GPRS0.
APN to access the GPRS services provided by
the internet.
Select service type SMTP.
Select connection profile 1.
Specify SMTP server address, enter user
name and password for SMTP authentication.
Enter text for subject field.
Sender's email address.
Recipients' email addresses.
Type of authentication: Sender name and
password are used for SMTP authentication.
Write message text.
Specify path on local FFS.
Send attachment located on FFS.