MLis MLB-G3002 - Table 6: Applicability of AT^SICS <Conparmtag> Values

MLB-G3002 Terminal User Guide 38 Rev 1.1
the value "0.0.0.0" is not indicated at all, no matter whether assumed by default
or explicitly specified.
See also note below.See also note below.
  
󰇛󰇜
Parameter value; type and supported content depend on related <conParmTag>.
    
󰇛󰇜
Supported connection type values in <conParmValue> for <conParmTag> value "conType".
GPRS0
GPRS connection.
However, for each configured connection profile there must be a free PDP
context in AT+CGDCONT. After entering AT^SISO MLB-G3002 automatically
tries to attach to a Packet Domain. Yet, the only exception is AT+CGATT which
can be used any time to detach from the Packet Domain and thus disconnect
the bearer opened with AT^SISO.
none
Clears the connection profile.
The list below shows which <conParmTag> parameters are mandatory (= m) or optional (= o).
<conParmTag>
<conParmValue-conType> GPRS0
"conType"
m
"user"
o
"passwd"
o
"apn"
m
"inactTO"
o
"dns1"
o
Table 6: Applicability of AT^SICS <conParmTag> values