MLis MLB-G3002 - Command Operation for FTP Mode

MLB-G3002 Terminal User Guide 27 Rev 1.1
5.3 Command Operation for FTP mode
FTP Download to FFS
AT^SICS=0,conType,GPRS0
OK
AT^SICS=0,apn,"internet"
OK
AT^SISS=1,srvType,"Ftp"
OK
AT^SISS=1,conId,0
OK
AT^SISS=1,address," ftp://175.180.133.126:21"
OK
AT^SISS=1,cmd,"fget"
OK
AT^SISS=1,user, "test01"
OK
AT^SISS=1,passwd,"1234"
OK
AT^SISS=1,path,"file:///d:/data/"
OK
AT^SISS=1,files," INDEX"
OK
AT^SISO=1
OK
^SIS: 1,0,2100,"Ftp open(175.180.133.126:21)"
Select connection type GPRS0.
APN to access the GPRS services
provided by the internet.
Select service type FTP.
Select connection profile 0.
Specify FTP address.
Select command type download.
Specify target path on local FFS.
Specify file to be downloaded.
Open the service.
Bearer is established, service is getting
started.
"^SIS" URC with <urcInfoId> 2100 (FTP)
indicates download status.