MLis MLB-G3002 - Command Operation for Transparent Socket Mode

To Next Page

To Previous Page

MLB-G3002 Terminal User Guide 26 Rev 1.1

5.2.1 Command Operation for Transparent Socket mode

Flow chart :

AT^SICS=0,conType,GPRS0

AT^SICS=0,apn,internet

AT^SISS=1,srvType,"Socket"

AT^SISS=1,conId,0

AT^SISS=1,address,"socktcp://175.

180.133.126:2020;etx;timer=200"

AT^SISO=1 (Internet Service Open)

^SISW:1, 1 (service is ready for upload)

AT^SIST=1 (Enter Transparent Access Mode)

+++ (Escape from Data Mode to AT Command Mode)

AT^SISC=1 (Internet Service Close)

Transparent Socket connection

Start