MLis MLB-G3002 - Page 34

MLB-G3002 Terminal User Guide 34 Rev 1.1
AT^SISW=1,30
^SISW: 1,30,0
OK
^SISW: 1,1
AT^SISW=1,30
^SISW: 1,30,0
OK
^SISW: 1,1
AT^SISW=1,0,1
^SISW: 1,0,0
OK
^SISW: 1,2
OK
^SIS: 6,0,2200,"HTTP POST: http://testnetwork/cgi/first.pl"
^SIS: 6,0,2200,"HTTP POST Response: 200"
^SISR: 1,1
^SISR: 1,500
^SISR: 1,197
Hello ..... Goodbye
OK
^SISR: 1,1
AT^SISC=1
OK
Send 30 bytes.
URC indicates that the HTTP service is
ready to send data.
Send 30 bytes.
URC indicates that the HTTP service is
ready to send data.
Finish input by setting <eodFlag> and
start HTTP POST request.
URC confirms: all data sent to server.
Read response from server.
Read 500 bytes.
Reading 197 bytes.
All data read.
Close the HTTP service.