MLis MLB-G3002 - Page 30

MLB-G3002 Terminal User Guide 30 Rev 1.1
^SISW: 1,40,0
01234567890123456789012345678901234567890
OK
^SISW: 1,1
AT^SISW=1,40
^SISW: 1,40,0
01234567890123456789012345678901234567890
OK
^SISW: 1,1
AT^SISW=1,0,1
^SISW: 1,0,0
OK
^SIS: 1,0,2100,"226 Transfer complete."
^SISW: 1,2
AT^SISC=1
OK
URC indicates that FTP service is ready for
upload.
Client requests to send 40 bytes.
The write command response confirms that 40
bytes must be transferred now.
User data is transferred.
URC indicates that the FTP service is ready to
transfer more data.
Client requests to send 40 bytes.
The write command response confirms that 40
bytes must be transferred now.
User data is transferred.
URC indicates that the FTP service is ready to
transfer more data.
No more data available. <eodFlag> set. File
"test.txt" shall be closed on FTP server.
URC indicates that data transfer finished
successfully. Connection to the FTP server
closes.
Close the service.