MLis MLB-G3002 - Page 42

MLB-G3002 Terminal User Guide 42 Rev 1.1
<port>: element can be set optional and replace the default port.
<user>: username for authentication, 32 octets. Can be set as part of
"address" or separately by <srvParmTag> parameter "user".
<passwd>: password for authentication, 32 octets. Can be set as part of
"address" or separately by <srvParmTag> parameter "passwd".
<path>: path of file or directory.
4. HTTP
HTTP client URL
Length: 6...255
"http[s]://[<user>:<passwd>\00]<server>:<port>/<path>"
<server>: FQDN or IP-address
<path>: path of file or directory
<port>: If parameter is omitted the service connects to HTTP default port 80.
<user>: username for authentication, 32 octets.
<passwd>: password for authentication, 32 octets.
"https://": Used for SSL connection.
Refer to "IETF-RFC 2616".
5. SMTP
"smtp[s]://[<user>:<passwd>\00]<host>:<Port>"
"smtp://": The default TCP port 25 for smtp server is used.
"smtps://": The default SSL port 465 for secure smtp server is used.
<host>: element can be an IPv4 address or DNS FQDN string.
<port>: element can be set optional and replace the default port.
<user>: username for authentication, 32 octets. Can be set as part of
"address" or separately by <srvParmTag> parameter "user".
<passwd> is for authentication, 32 octets. Can be set as part of "address"
or separately by <srvParmTag> parameter "passwd".