Modecom 5 GPS navigation User Manual

49
5” GPS Navigation
49
5” GPS Navigation
4. After communication, unplug the MINI USB cable.
7.9.2 MS ACTIVESYNC
1. Tap
in the system interface to enter USB Option as shown
below.
Select MASS ACTIVESYNC and tap to save the setting.
2. Install the application Mobile Device in a drive of PC. Then the
following icon
will appear in the drive selection.
3. Connect the MINI USB terminal of the USB cable to the MINI
USB port of the GPS navigator and the standard USB terminal to the
USB Host port of PC.
4. After the PC finds new hardware, double click the Mobile Device
drive in the selection area to enter the memory of GPS navigator for
data transmission.
5. After transmission, unplug the USB cable.
[Attention] For data safety back up the navigator data
[Note] If MASS STORAGE is selected while the GPS navigator is
connected with PC, other operations will be suspended.

Modecom 5 GPS navigation Specifications

General

Brand	Modecom
Model	5 GPS navigation
Category	GPS
Language	English