EasyManua.ls Logo

Moduline CVE031E - Preheat; Boiler PREHEATING; Chamber PREHEATING

Moduline CVE031E
69 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
USA Ed. 0215
8 • PREHEAT
USE
8.1 - BOILER PREHEATING
When the appliance is turned on, the boiler must be
preheated by pressing the related icon on the home
screen.
The resistance of the icon turns red to indicate that

minutes.
When preheating is completed, the icon turns green,

pressure.

-

pressed after the preheating of the boiler to start the

can be pressed immediately, the appliance will auto-
matically start preheating of the chamber when that of
the boiler is completed.
8.2 - CHAMBER PREHEATING

empty cooking chamber is recommended in order to
reduce the time needed for subsequent operations
and ensure good results.

button to start preheating; the button stays lit.
After the preheating of the chamber is completed
-

-




phases are entered into.
The chamber is heated by the injection of steam from
the boiler to the chamber.
At this stage, due to the discharge valve that is
always open, the chamber is not under pressure and
this allows for the door to be opened without creating
a vacuum inside.

Table of Contents

Related product manuals