Moduline CVE031E - Sterilisation: New Program


USA Ed. 0215
11.5 - STERILISATION: NEW PROGRAM
Using the knob, scroll down all the recipes

located at the bottom of the memorised pro-
grams’ first screen.



-
meter values by selecting cycle 1 and pres-


Select the cavity temperature icon and access

Change the value by using the knob and press

Continue to the core temperature icon and
modify it as done for the chamber temperatu-

Then go to the time parameter and set the


-
ber cooling to allow for the opening of the

NOTE: Even if the chamber cooling tempera-
ture drops below the set value, the door will


jars may burst.


11 • EXTRA PROGRAMS