Moduline CVE031E - CONNECTION to the Brita SOFTENER FILTER (OPTIONAL FEATURE of the APPLIANCE)

9
USA Ed. 0215
2 • INSTALLATION INSTRUCTIONS
INSTALLATION
2.6 - CONNECTION TO THE “BRITA” SOFTENER FILTER (optional feature of the appliance)
The installation of the filter must only be carried out by an authorised technician as this opera-
tion requires subsequent change in the internal parameters of the oven that only the technician is
qualified to know.

please refer to the filter manual.
After positioning and securing the filter in a stable manner, connect the input to the mains via the
same pipe and fittings supplied.
Then connect the filter outlet to the softened water oven input using the pipe and fittings supplied.


the electronic panel will indicate in advance that the filter is about to be depleted.
Use the kit to test the water supplied with the filter.






insert a second specific password and set the hardness
value found during the water test.
This setting will automatically update the filter duration.

technical assistance.